After blowing, de-moulding is automatic, which increase the efficiency largely.
Two-bar linkage clamping design.
Adopting high technology micro PLC controller. Sure the machine working properly and stable
infra-red pre heater gives equilibrium temperature for inside and surface of the perform.
parameters:
ITEM | HZ-880A | |
1出4 | ||
Material | / | PET |
Volume | L | 0.1—1.5 |
Theoritical output | Pcs/h | 1800—2000 |
Neck size | mm | 20—38 |
Max.length | mm | 320 |
Max.diameter | mm | 100 |
Clamping force | KN | 260 |
Power | KW | 24 |
Voltage/Frequency(3 phase) | V/HZ | 220-380V / 50-60HZ |
Working pressure | MPa | 0.8—1.0 |
Blowing pressure | MPa | 3.0 |
Chilled water rate | L/min | 10 |
Main body dimension(LxWxH) | M | 1.8x0.8x2.2 |
Main body weight | T | 1.0 |
Pre-heater dimension (LxWxH) | M | 2.0x0.72x1.58 |
Pre-heater weight | T | 0.6 |
After blowing, de-moulding is automatic, which increase the efficiency largely.
Two-bar linkage clamping design.
Adopting high technology micro PLC controller. Sure the machine working properly and stable
infra-red pre heater gives equilibrium temperature for inside and surface of the perform.
parameters:
ITEM | HZ-880A | |
1出4 | ||
Material | / | PET |
Volume | L | 0.1—1.5 |
Theoritical output | Pcs/h | 1800—2000 |
Neck size | mm | 20—38 |
Max.length | mm | 320 |
Max.diameter | mm | 100 |
Clamping force | KN | 260 |
Power | KW | 24 |
Voltage/Frequency(3 phase) | V/HZ | 220-380V / 50-60HZ |
Working pressure | MPa | 0.8—1.0 |
Blowing pressure | MPa | 3.0 |
Chilled water rate | L/min | 10 |
Main body dimension(LxWxH) | M | 1.8x0.8x2.2 |
Main body weight | T | 1.0 |
Pre-heater dimension (LxWxH) | M | 2.0x0.72x1.58 |
Pre-heater weight | T | 0.6 |