Packaging machine in the long-term continuous work, overload work and use time is too long, often lead to a variety of faults, such as material pull off, packaging film is not flat, packaging bag sealing is not tight, color calibration positioning is not allowed to a variety of problems, there are also in the process of packaging machine work due to the technical ability of operators problems caused by the vacuum packaging machine can not work normally.If there is a mistake, it is not terrible. What is terrible is that we know there is a mistake and are not willing to correct it. But once we find the fault, we will immediately repair it.
For different faults, the Anhui afripack packaging machine found the cause of the fault in time and made different remedial measures.The packaging material is broken mainly because the packaging material has joints or rough edges with too big a break mark. There is a fault in the line of the paper supply motor, and the unqualified paper segment needs to be removed. The line of the paper supply motor needs to be repaired in time and the paper supply proximity switch needs to be replaced.
Automatic liquid packing machine sealing is not strict mainly because of the packaging material inner layer is not uniform, sealing pressure is not uniform or sealing temperature is low, should promptly remove unqualified packaging material, adjust the sealing pressure, improve the hot air temperature.Color calibration is not allowed because the bag length setting value is not appropriate, should increase the bag length setting value, is the actual size of the bag in the standard length of the color standard. For the problems of operators, skilled operators should be replaced in time to reduce the existence of faults.
